Publishing

Discard a team member’s draft changes

Discards the draft’s changes, back to the published document. Answers the draft (false when it had no changes to discard).

Access: an API key with content:team-members:write (or a master above it: content:team-members:all, content:all, admin:all). A signed-in person may call it as far as their own permissions allow; anyone else gets 403.

Rate limit: the key’s own writes-per-minute limit, set when the key is created (default 120); over it, 429 with Retry-After.

POST

team-member

{_id}

revert-draft-to-published

cURL

curl --request POST \
  --url https://{host}/api/v1/team-member/{_id}/revert-draft-to-published \
  --header 'Authorization: <api-key>'

import { createSiteClient } from '@fetchski/attract-cms-sdk';

const site = createSiteClient();
const teamMember = await site.teamMembers().revertTeamMemberDraftToPublished({ id: 'clx8m2k4p0000a1b2c3d4e5f6' });

{
  "title": "",
  "slug": "",
  "_id": "<string>",
  "type": "<string>",
  "role": "",
  "tagline": "",
  "bio": "",
  "featured": false,
  "sortOrder": 0,
  "visibility": "public",
  "scheduledPublish": "<string>",
  "scheduledUnpublish": "<string>",
  "memberFontOverrides": [],
  "_photo": [
    {}
  ],
  "photoUrl": "<string>",
  "_hoverPhoto": [
    {}
  ],
  "hoverPhotoUrl": "<string>",
  "email": "<string>",
  "phone": "",
  "socialLinks": [],
  "source": "manual",
  "sourceId": "",
  "archived": false,
  "createdAt": "2023-11-07T05:31:56Z",
  "updatedAt": "2023-11-07T05:31:56Z",
  "aposShareKey": "k3v9x2m7q1z8w4p6"
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

Authorizations

Authorization

string

header

required

Paste your API key as the CMS showed it: fsk_<site>_<key id>_<secret> (issued under API Keys). ApiKey in front of it works too. Leave it empty to read as the public.

Scopes

content:team-members:write

Path Parameters

_id

string

required

The document’s _id: a full id names its own locale and mode (the draft’s …:en:draft, the published one’s …:en:published; no aposMode needed), a bare aposDocId takes the request’s (aposLocale, aposMode).

Response

Done.

TeamMember content type

title

string

default:""

required

Its title: the name it goes by in every list, and the heading of its page where it has one.

slug

string

default:""

required

The URL name: lowercase words joined by hyphens (letters outside a–z, even emoji, are kept).

_id

string

required

read-only

The document’s id. On a type with drafts it ends in its locale and mode (…:en:published, …:en:draft): the part before the first colon is its aposDocId, shared by both copies. The {_id} the type’s routes take.

type

string

required

read-only

The document type’s name: always this type’s.

role

string | null

default:""

e.g. “Founder” or “Operations lead”.

tagline

string | null

default:""

Optional one-liner shown on the compact card layouts — a motto, specialty or fun fact.

bio

string | null

default:""

Optional short biography, shown on the roomier card layouts.

featured

boolean | null

default:false

Hand-curation flag. The widget can show only featured members, and the Spotlight layout renders them large.

sortOrder

integer | null

default:0

Members are listed lowest number first — the explicit team order.

visibility

enum<string> | null

default:public

Select whether this content is public or private

Available options:

public,

loginRequired,

null

scheduledPublish

string | null

An ISO 8601 date and time, e.g. 2026-10-21T14:30:00.000Z.

scheduledUnpublish

string | null

An ISO 8601 date and time, e.g. 2026-10-21T14:30:00.000Z.

memberFontOverrides

Typeface for this card · object[] | null

Optional. Set part of this team member’s card in a different typeface. Leave empty to follow the section (and the site fonts).

Maximum array length: 4

Show child attributes

_photo

Photo · object[] | null

Optional headshot from the media library. Falls back to the Photo URL below, then to a lettered-initial avatar. The related @apostrophecms/image documents, in order (empty when none). To set it, send a list of { "_id": "…" }, one per document (one at most); a document the site can’t find is left out.

Maximum array length: 1

photoUrl

string | null

Alternative to uploading: a full https:// link to a photo hosted elsewhere. Only used when no Photo is selected above — prefer uploading when you can (it enables cropping, focal point and responsive sizes). When set, a URL; empty or null when not.

_hoverPhoto

Alternate photo (shown on hover) · object[] | null

Optional second photo (e.g. a candid shot) that cross-fades in when a visitor hovers the card. Needs the Team section’s hover-photo toggle on. The related @apostrophecms/image documents, in order (empty when none). To set it, send a list of { "_id": "…" }, one per document (one at most); a document the site can’t find is left out.

Maximum array length: 1

hoverPhotoUrl

string | null

URL alternative to the alternate photo above — only used when none is selected. Same hover behavior. When set, a URL; empty or null when not.

string | null

Optional. Only shown when the Team section has “Show email / phone” turned on. When set, an email address; empty or null when not.

phone

string | null

default:""

Optional. Only shown when the Team section has “Show email / phone” turned on.

Each profile is optional — add only the networks you use. A link only appears once it has a URL. Pick a platform for its brand icon, or “Other / custom” to choose any icon.

Show child attributes

source

enum<string> | null

default:manual

read-only

Set automatically. Demo placeholders are removed the moment a real member is published.

Available options:

manual,

demo,

null

sourceId

string | null

default:""

read-only

Internal de-duplication key set by the demo seed.

archived

boolean | null

default:false

In the archive: kept, but out of every list and off the site until it is restored. false (or null) for a live document.

createdAt

string<date-time> | null

read-only

When it was created (ISO 8601).

updatedAt

string<date-time> | null

read-only

When it last changed (ISO 8601).

The draft’s preview share key, while its share link is on: the link is the draft’s _url with aposShareKey and aposShareId (the draft’s _id) in its query. Absent otherwise, and on published documents.

Example:

"k3v9x2m7q1z8w4p6"

cURL

curl --request POST \
  --url https://{host}/api/v1/team-member/{_id}/revert-draft-to-published \
  --header 'Authorization: <api-key>'

import { createSiteClient } from '@fetchski/attract-cms-sdk';

const site = createSiteClient();
const teamMember = await site.teamMembers().revertTeamMemberDraftToPublished({ id: 'clx8m2k4p0000a1b2c3d4e5f6' });

{
  "title": "",
  "slug": "",
  "_id": "<string>",
  "type": "<string>",
  "role": "",
  "tagline": "",
  "bio": "",
  "featured": false,
  "sortOrder": 0,
  "visibility": "public",
  "scheduledPublish": "<string>",
  "scheduledUnpublish": "<string>",
  "memberFontOverrides": [],
  "_photo": [
    {}
  ],
  "photoUrl": "<string>",
  "_hoverPhoto": [
    {}
  ],
  "hoverPhotoUrl": "<string>",
  "email": "<string>",
  "phone": "",
  "socialLinks": [],
  "source": "manual",
  "sourceId": "",
  "archived": false,
  "createdAt": "2023-11-07T05:31:56Z",
  "updatedAt": "2023-11-07T05:31:56Z",
  "aposShareKey": "k3v9x2m7q1z8w4p6"
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

{
  "name": "<string>",
  "message": "<string>",
  "data": {}
}

Get started

How the API works

Pages & Site

Content

Media

Forms

Ads & Conversions

Analytics

Signing in (people)

Discard a team member’s draft changes

Authorizations

Scopes

Path Parameters

Response